Investigation of strain‐inhomogeneities during hot flat rolling – influences on the microstructure evolution Artikel uri icon

Open Access

  • false

Peer Reviewed

  • true

Abstract

  • In this paper results of the influence of the material flow on the microstructural evolution of austenite during hot flat rolling are presented. Material flow is investigated by means of rolled specimens, which are prepared with a square‐grid in the middle of the plate. Analyses of the microstructure were applied to elucidate the evolution of the prior austenite structure in thickness direction of the rolled specimens. The inhomogeneous deformation in thickness direction in combination with algorithms for the calculation of the microstructural evolution gives more detailed information on the occurrence of microstructural inhomogeneities compared to the usually applied strip‐model. The inhomogeneous deformation over the thickness of a rolled sheet can be described with sufficient accuracy by means of the strain model according to Zouhar and Lachmann. Im vorliegenden Beitrag werden Ergebnisse zum Einfluß des Werkstoffflusses auf die Gefügeentwicklung des Austenits beim Warmwalzen auf der Flachbahn mitgeteilt. Der Werkstofffluß wird anhand von gewalzten Proben, die in Breitenmitte mit einem Raster versehen waren, ermittelt. Gefügeanalysen dienten zum Nachweis der Entwicklung des ehemaligen Austenitgefüges über der Walzgutdicke. Die Berücksichtigung der inhomogenen Umformung über die Walzgutdicke liefert in Verbindung mit Algorithmen zur Beschreibung der Gefügeentwicklung im Austenit detailliertere Aussagen zum Auftreten von Gefügeinhomogenitäten, als es mit dem Streifenmodell möglich ist. Die inhomogene Umformung über der Walzgutdicke kann mit dem Formänderungsmodell nach Zouhar und Lachmann mit hinreichender Genauigkeit erfaßt werden.

Veröffentlichungszeitpunkt

  • Oktober 1, 1991